FIRMWARE RELEASE NOTE ===================== Products affected: P3245-V/-VE Release date: 2019-10-03 Release type: Production Firmware version: 9.40.1.3 Preceding release: 9.40.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. Features in 9.40.1 ================================================================================ 9.40.1:F1 Added support for H.265 stream profiles to be used in Send Video Clip action rules. 9.40.1:F2 Added support for search functionality in help files. 9.40.1:F3 Added support for systemready.cgi which will improve re-connection of the browser to the web-interface after e.g. powercyle or restart of the product. 9.40.1:F4 Added support for average bitrate control (ABR). 9.40.1:F5 Added support for automatic firmware rollback verfication. The user can chose to select this option prior to performing an firmware upgrade. When chosen, the product will perform the upgrade and then wait a pre-defined time for the user to acknowledge the upgrade in the web-interface. If not acknowledged in time, the product will rollback to its previous firmware. 9.40.1:F6 Added support for the possibility to configure a secondary NTP server in web- interface under Settings -> System -> Date & Time or via VAPIX Time API. 9.40.1:F7 Removed the root users default password in factory defaulted firmware. The password of the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow further configuration. This change only affects products in its factory defaulted state, products that are already deployed in production systems are not affected by this update until factory defaulted. For more information please see https://www.axis.com/support/faq/FAQ116429. 9.40.1:F8 Added support for uploading custom firmware certificates in the web-interface under Settings -> System -> Security in order to allow the Axis product to accept AXIS developer firmware during firmware upgrade. 9.40.1:F9 Added support for millisecond timestamps in JPEG header. 9.40.1:F10 Added an API for mDNS-SD. 9.40.1:F11 TLS1.0 and TLS1.1 is now disabled by default. 9.40.1:F12 Added support for source-specific multicast (SSM) via http://ip-address/axis- media/ssm/media.amp. The following parameters need to be configured prior to initiating a video stream via SSM: Network.RTP.R#.VideoAddress Network.RTP.R#.VideoPort Network.RTP.R#.AudioAdress Network.RTP.R#.AudioPort 9.40.1:F13 Added support for TLSv1.3. 9.40.1:F14 The classic GUI has been deprecated and is now removed to increase overall cyber security level. 9.40.1:F15 Upgraded Apache to version 2.4.39 to increase overall minimum cyber security level. 9.40.1:F16 Updated Video Motion Detection to version 4.3.5. 9.40.1:F17 It is now possible to upload .PFX formatted certificates with a total size of 102400 bytes. The previous limit was 1/10 of it. 9.40.1:F18 Added support for "Wait at least time x" before re-running an configured action rule. Corrections in 9.40.1.3 ================================================================================ 9.40.1.3:C1 Corrected an issue that could cause false RAM memory initialisation during boot- up on rare occasions. Corrections in 9.40.1 ================================================================================ 9.40.1:C1 Removed a unecessary warning text for a user when setting up a action rule that requires a stream profile while it is actually already in place. 9.40.1:C2 Corrected an issue that made it possible to add a action rule recipient without nice-name via API. 9.40.1:C3 Fine tuned image processing. Known Bugs/Limitations ================================================================================ 9.40.1:L1 There might be event settings available that is not applicable to the product with the current setup. 9.40.1:L2 There might be features currently explained in the help files that may not be supported by the camera. 9.40.1:L3 There might be event settings available that is not applicable to the product with the current setup. Supported AXIS VAPIX API Image Resolutions for P3245-V/-VE ================================================================================ Resolution Exceptions ========== ========== 1920x1080 1440x1080 1440x900 1280x960 1280x800 1280x720 1024x768 1024x640 1024x576 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 160x120 160x100 160x90 1400x1050 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 192x144 1) 176x144 1) 176x120 1) 1) Not visible in web user interface