FIRMWARE RELEASE NOTE ======================== Products affected: P1375-E / P1377-LE / P1378-LE Release date: 2020-12-18 Release type: Production Firmware version: 10.2.3 Preceding release: 10.2.0 -------------------------------------------------------------------------------- Upgrade recommendations ======================== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version. For example, if the device currently is running AXIS OS 7.40 and you want to upgrade to the latest AXIS OS Active Track (Example: 10.1, October 2020) then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80 LTS => 10.1. More detailed recommendations can be found in the AXIS OS portal at https://www.axis.com/support/firmware. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or according to instructions at https://www.axis.com/support/firmware. NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security New features in 10.2.3 ================================================================================ 10.2.3:F1 Added support for a new revision of the IR illuminator (included in Axis P1377-LE and P1378-LE, accessory for P1375-E). The new revision of the illuminator will not work with older firmware. More information can be found in https://www.axis.com/support/faq/FAQ116505 Features in 10.2.0 ================================================================================ 10.2.0:F1 Axis Object Analytics 1.0.15 is preinstalled. 10.2.0:F2 Updated Apache to version 2.4.46 to increase overall cyber security level. 10.2.0:F3 The AXIS Internet Dynamic DNS functionality has been removed. 10.2.0:F4 Removed feature NAT Traversal from UPnP. 10.2.0:F5 Added new events for supervising the digital audio input. 10.2.0:F6 Removed the record/play.cgi API. 10.1.0:F1 Axis Object Analytics 1.0.8 beta is preinstalled. 10.1.0:F2 The parameters Time.ServerTime and Time.ServerDate that have been deprecated for some time are now removed. 10.1.0:F3 Added support for certificate-based client authentication in MQTT. 10.1.0:F4 Added support for Remote Syslog API which enables Axis devices to send their log messages to a remote syslog server. Remote Syslog can be configured via web- interface under Settings -> System -> TCP/IP or using the VAPIX API that can be found here -> https://www.axis.com/vapix-library/. 10.1.0:F5 A factory default is now mandatory when trying to downgrade the device. 10.1.0:F6 Improved performance when building up an RTSP video stream by 30%. 10.1.0:F7 Added support for a new overlay modifier "%v" that displays seconds in 1/1000 fractions. 10.1.0:F8 Added support for HTTP Strict Transport Security (HSTS) when using HTTPS. 10.1.0:F9 The following HTTP headers are now configured per default to increase overall cybersecurity level : X-Frame-Options: SAMEORIGIN X-Content-Type-Options: nosniff X-XSS-Protection: 1; mode=block. 10.1.0:F10 Updates UPnP to version 1.8.7 which patches CVE-2020-12695 (Callstranger). 10.1.0:F11 Added support for IEEE 802.1x-2010 which provides support for EAPoL version 3. 10.1.0:F12 Changed default IEEE 802.1x EAPoL settting from version 1 to 3. 10.1.0:F13 Added support for configuring 802.1X without CA certificate. This will make the device authenticate on any network, not just the trusted one. 10.1.0:F14 The EAP-TLS-identity field in the 802.1x configuration is now by default filled with "axis-" value. 10.1.0:F15 Updated Video Motion Detection to version 4.4.8. 10.1.0:F16 Removed the download.cgi API. The exportrecording.cgi API which was introduced in 5.60 is the substitute. 10.0.0:F1 Axis Object Analytics 1.0.4 beta is preinstalled. 10.0.0:F2 Added support for using mp3 audio clips. 10.0.0:F3 Added VAPIX API for enabling/disabling all privacy masks. 10.0.0:F4 Administrator credentials are now required to access privacymask.cgi. 10.0.0:F5 Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI. Note that this functionality requires that the product have direct access to the internet. 10.0.0:F6 Updated Apache to version 2.4.43 to increase overall cyber security level. 10.0.0:F7 Updated OpenSSL to version 1.1.1g to increase overall minimum cyber security level. Corrections in 10.2.0 ================================================================================ 10.2.0:C1 Corrected an issue that caused an error message to pop-up when pressing the test button of an event using HTTP recipients. 10.2.0:C2 Corrected an issue that caused the 'last will & testament' message not to work. Therefore, the default behavior for connect, disconnect and 'last will & testament' messages have been modified. By default a common topic, {device serial number}/event/connection, and a common payload structure will be used for such messages. 10.2.0:C3 Corrected an issue that caused a hard factory default even though a soft factory default was requested when upgrading the firmware via VAPIX. 10.2.0:C4 Corrected an issue with riris adjustments. 10.2.0:C5 Corrected an issue that sometimes could make it impossible to export the full length of recordings. 10.2.0:C6 Corrected an issue that caused the device to stop video streaming over multicast after receiving multiple RTSP PLAY requests with "npt=0.000-" payload. 10.1.0:C1 Corrected an issue that caused an FTP Send Image action rule to use the temporary mode option even if the option was not enabled. 10.1.0:C2 On upgrade to 10.1 the web browser cache needs to be reset or the configuration page for VMD and/or Guard Suite ACAPs will show up as a blank screen. 10.1.0:C3 Corrected an issue that caused old recordings to not be removed after their retention period was expired. 10.0.2:C1 Corrected an issue that sometimes caused event triggered recordings to fail. 10.0.0:C1 Corrected an issue that sometimes could cause problems with edge sync between camera and Genetec VMS. 10.0.0:C2 Corrected an issue that prevented cross device triggering to work properly when IPv6 was used. 10.0.0:C3 Corrected an issue that sometimes made it impossible to edit action rules after upgrade. Known Bugs/Limitations ================================================================================ Supported AXIS VAPIX API Image Resolutions for P1375-E / P1377-LE / P1378-LE ================================================================================ Resolution Exceptions Capture mode ------------ ------------ ----------------- 3840x2160 5) 3072x1728 5) 2880x2160 5) 2688x1512 5) 6) 2592x1944 4) 5) 2592x1458 4) 5) 6) 2560x1440 4) 5) 6) 2304x1728 4) 5) 6) 2016x1512 4) 5) 6) 1920x1440 4) 5) 6) 1920x1080 2) 3) 4) 5) 6) 1440x1080 2) 3) 4) 5) 6) 1280x960 2) 3) 4) 5) 6) 1280x800 2) 3) 4) 5) 6) 1280x720 2) 3) 4) 5) 6) 7) 1024x768 2) 3) 4) 5) 6) 7) 1024x640 2) 3) 4) 5) 6) 7) 1024x576 2) 3) 4) 5) 6) 7) 800x600 2) 3) 4) 5) 6) 7) 800x500 2) 3) 4) 5) 6) 7) 800x450 2) 3) 4) 5) 6) 7) 640x480 2) 3) 4) 5) 6) 7) 640x400 2) 3) 4) 5) 6) 7) 640x360 2) 3) 4) 5) 6) 7) 480x360 2) 3) 4) 5) 6) 7) 480x300 2) 3) 4) 5) 6) 7) 480x270 2) 3) 4) 5) 6) 7) 320x240 2) 3) 4) 5) 6) 7) 320x200 2) 3) 4) 5) 6) 7) 320x180 2) 3) 4) 5) 6) 7) 160x120 2) 3) 4) 5) 6) 7) 160x100 2) 3) 4) 5) 6) 7) 160x90 2) 3) 4) 5) 6) 7) 1400x1050 1) 2) 3) 4) 5) 6) 768x576 1) 2) 3) 4) 5) 6) 7) 720x576 1) 2) 3) 4) 5) 6) 7) 704x576 1) 2) 3) 4) 5) 6) 7) 704x480 1) 2) 3) 4) 5) 6) 7) 704x288 1) 2) 3) 4) 5) 6) 7) 704x240 1) 2) 3) 4) 5) 6) 7) 384x288 1) 2) 3) 4) 5) 6) 7) 352x288 1) 2) 3) 4) 5) 6) 7) 352x240 1) 2) 3) 4) 5) 6) 7) 192x144 1) 2) 3) 4) 5) 6) 7) 176x144 1) 2) 3) 4) 5) 6) 7) 176x120 1) 2) 3) 4) 5) 6) 7) 1) Not visible in web user interface 2) 1080p @ 25/30 fps (WDR) 3) 1080p @ 50/60 fps (no WDR) 4) 5MP 4:3 @ 25/30 fps (WDR) 5) 4K @ 25/30 fps (WDR) 6) 4MP 16:9 @ 25/30 fps (WDR) 7) 720p @ 180 fps (no WDR)