FIRMWARE RELEASE NOTE ===================== Products affected: AXIS M7104 Release date: 2020-02-03 Release type: Production Firmware version: 9.25.1.5 New product: 9.25.1.4 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. Features in 9.25.1.5 ================================================================================ 9.25.1.5:F1 Added support for systemready.cgi which will improve re-connection of the browser to the web-interface after e.g. powercyle or restart of the product. 9.25.1.4:F1 Removed the root users default password in factory defaulted firmware. The password of the root user must be set first in order to initialize VAPIX and ONVIF interfaces to allow further configuration. This change only affects products in its factory defaulted state, products that are already deployed in production systems are not affected by this update until factory defaulted. For more information please see https://www.axis.com/support/faq/FAQ116429. Corrections in 9.25.1.5 ================================================================================ 9.25.1.5:C1 Image stability fixes when using many streams. 9.25.1.5:C2 Added correct aspectratio correction for squarepixel compensation for H.264 and H265 when using PAL and NTSC cameras. 9.25.1.5:C3 Quadview does not support 180 degrees rotation. 9.25.1.5:C4 Added support for videostatus.cgi which will provide information whether there is a camera source connected to a input or not. 9.25.1.5:C5 Fixed JPEG End marker error. Corrections in 9.25.1.4 ================================================================================ 9.25.1.4:C1 Add No-video overlay when a manually configured camera gets dissconected. Known Bugs/Limitations ================================================================================ 9.25.1.1:L1 The VAPIX Parameter Network.RTSP.AllowClientTransportSettings in PlainConfig -> Network needs to be set to "yes" before video can be streamed via ONVIF multicast. 9.25.1.1:L2 There might be event settings available that is not applicable to the product with the current setup. 9.25.1.1:L3 Compatibility issues with Axis Companion up to version 3.63 9.25.1.1:L4 This product does not support image rotation via VAPIX rtsp stream 9.25.1.1:L5 ONVIF shows all available resolutions for the unit, even resolutions that is not supported by the camera 9.25.1.1:L6 The aspect ratio for PAL and NTSC video-streams in quad view is 5:4 and 3:2 respectively. 9.25.1.1:L7 Changing DNS name requires the unit to be restarted to be registered in the DDNS database Supported AXIS VAPIX API Image Resolutions for AXIS M7104 ========================================================= Resolution Exceptions ========== ========== 16CIF 1536x1152 2) 4) 1280x960 3) 4) D1 720x576 2) 720x480 3) 4CIF 704x576 2) 704x480 3) 2CIF 704x288 2) 704x240 3) CIF 352x288 2) 352x240 3) QCIF 176x144 2) 176x120 3) VGA 640x480 1) analyze 1) 1) Not visible in web user interface 2) PAL mode resolution 3) NTSC mode resolution 4) Available on Quad channel