FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M5055 Release date: 2017-11-06 Release type: Production Firmware version: 6.53.1.1 File name: M5055_6_53_1_1.bin New Product: No previous release -------------------------------------------------------------------------------- UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Known Bugs/Limitations ====================== 6.53.1.1:L1 It is recommended to factory default the unit before making a downgrade if needed. 6.53.1.1:L2 Recording streams to SD card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 6.53.1.1:L3 Video stream data will stop being sent when performing a PTZ test although the network session will remain. Some clients may disconnect if they do not detect video data. Normal operation will resume after the test is completed. 6.53.1.1:L4 The warning message "Wrong stream id, do not create image2d plugin for stream id -1" is stored in the server report on bootup. Supported AXIS VAPIX API Image Resolutions for AXIS M5055 ========================================================= Resolution Exceptions ========== ========== 1920x1080 1280x720 1280x960 1) 1024x768 1) 1024x576 1) 800x600 1) 800x450 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 640x480 1) 640x360 1) 480x360 1) 480x270 384x288 1) 352x288 1) 352x240 1) 320x240 1) 320x180 240x180 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x90 1) 1) Not visible in web user interface