FIRMWARE RELEASE NOTE
=====================

Products affected:        M3106-L MK II/-LVE MK II

Release date:             2019-07-08

Release type:             Production

Firmware version:         9.30.1.2

Preceding release:        9.30.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


Features in 9.30.1
================================================================================

9.20.1:F1
Added support for ONVIF Profile T.

9.20.1:F2
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.

9.20.1:F3
Added support for dynamic power allocation via Link Layer Discovery Protocol
(LLDP) in addition to PoE-class based power allocation. This allows the switch
to allocate less power to the camera and potentially a greater number of PoE
devices can be connected to the switch.
LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE
-> LLDP Send Max PoE.

9.20.1:F4
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.

9.20.1:F5
Updated Video Motion Detection to version 4.3.4.

9.20.1:F6
Added support for signed ACAP applications.

9.20.1:F7
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.10.1:F2
Updated Video Motion Detection to version 4.3.3.

9.10.1:F3
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.10.1:F4
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.30.1.2
================================================================================

9.30.1.2:C1
Corrected an issue that caused the product to show itself as "Unknown Network
Camera".


Corrections in 9.30.1
================================================================================

9.20.1:C1
Corrected an issue that could cause the camera to get unresponsive when two
clients are streaming over multicast using the same streaming parameters.

9.10.1:C1
Corrected an issue that prevented the product from inserting trigger data in SEI
message when streaming H.264.

9.10.1:C2
Corrected an issues that could cause an incorrect error message when testing
HTTP recipient.

9.10.1:C3
Increased the character limit for certificate IDs from 32 to 128 characters.

9.10.1:C4
Corrected an issue that caused RTSP client timeout to be delayed.

9.10.1:C5
Corrected an issue that caused an HTTP-recipient based action rule to fail when
the response from the server excluded the textual phrase (Example: HTTP 200).
This will work now.

9.10.1:C6
Corrected an issue that caused the temperature information delivered via SNMP
OID to be corrupted.


Known Bugs/Limitations
================================================================================


9.20.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.

9.10.1:L2
It is not possible to set the capture mode in the installation wizard if 50Hz
capture frequency is selected.
Workaround: Set the capture mode under the Image tab after finishing the
installation wizard.


Supported AXIS VAPIX API Image Resolutions for M3106-L MK II/-LVE MK II
================================================================================

Resolution  Exceptions
==========  ==========

2688x1520   1)
2560x1440   2)
2016x1512   3)
1920x1080
1280x960
1280x720
1024x768
1024x576
800x600
640x480
640x360
352x240
320x240


1) 4MP 2688x1520 (16:9) @ 25/30 fps
2) QHD 2560x1440 (16:9) @ 25/30 fps
3) 3MP 2016x1512 (4:3) @ 25/30 fps