FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M3024-LVE Network Camera Release date: 2013-07-04 Release type: Production Firmware version: 5.40.5 File name: M3024-LVE_5_40_5.bin Preceding release: N/A AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Release 5.40.5 ================= 5.40.5 is the first official production service release for the AXIS M3024-LVE. Known Bugs/Limitations ====================== 5.40.3:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.3:L02 Moving a view area doesn't always work as expected. 5.40.3:L03 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.3:L04 Using modifiers like %c in a network share upload event does not work. 5.40.3:L05 It's not possible to trigger action rules based on temperature. 5.40.3:L06 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.5:L07 Script error when pressing Create Certificate Request. 5.40.5:L08 DSCP value for Event/Alarm over IPv4 is always 0. 5.40.5:L09 Changing DSCP values might prompt for password. 5.40.5:L10 Privacy mask can't be added in Chrome. 5.40.5:L11 Number of different configured video streams are limited by hardware. 5.40.5:L12 Zoom bar is disabled until using zoom buttons. 5.40.5:L13 Compression input field accepts all type of characters. Description: No warning is shown if Compression is set to Negative number, higher than MAX or a non-integer. 5.40.5:L14 IR illumination action when IR illumination is disabled. Description: IR cut filter switches even when IR Illumination is disabled 5.40.5:L15 Preset Reached event may trigger before reaching preset. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS M3024-LVE. Resolution Exceptions ========== ========== 1280x800 1280x720 1024x640 800x600 640x480 640x400 640x360 480x360 352x240 320x240 1440x900 1) 1024x768 1) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface