FIRMWARE RELEASE NOTE ===================== Products affected: AXIS M3016 Release date: 2018-01-12 Release type: Production Firmware version: 7.15.5 File name: M3016_7_15_5.bin New product: No previous release -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. Release 7.15.5 ============== This is the first Release for the AXIS M3016. Known Bugs/Limitations ================================================================================ 7.15:L1 Recording streams to SD Card with total bit rate above 12Mbit/sec may cause missing frames/sequences. 7.15:L2 When choosing one of the exposure modes: flicker reduced or flicker free that is does not have the same Hz as the capture frequency set in the camera the max shutter will displayed as "custom" in the web gui. 7.15:L3 Number of different configured video streams is limited to maximum 4 by hardware. Supported AXIS VAPIX API Image Resolutions for AXIS M3016 ================================================================================ Resolution Exceptions ========== ========== 2016x1512 2) 2304x1296 3) 1920x1080 1280x960 1280x720 1024x768 1024x576 800x600 640x480 640x360 352x240 320x240 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface 2) 3MP (2016x1512) 3) 3MP 16:9 (2304x1296)