FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1144-L Network Camera Release date: 2013-06-24 Release type: Production Firmware version: 5.40.10.6 File name: M1144-L_5_40_10_6.bin Preceding release: M1144-L_5_40_10_5.bin AMC version: 6.0.6.7-1 ------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Improvements in 5.40.10.6 since 5.40.10.5 ========================================= 5.40.10.6:I01 New version of libupnp without buffer overflow vulnerabilities. 5.40.10.6:I02 Improved stability when using AxisNS. 5.40.10.6:I03 TTL value for always multicast is taken into account. 5.40.10.6:I04 SDP for always multicast available to viewer users. 5.40.10.6:I05 No extra backslash added on a FTP server when using a domain\username scheme. 5.40.10.6:I06 ACAP applications can reserve the YUV buffer. 5.40.10.6:I07 Improved TCP notification stability. 5.40.10.6:I08 Improved stability with AVHS and VMD 2.1. 5.40.10.6:I07 Solved connection issues to AVHS servers. 5.40.10.6:I10 MAC address now properly sent in the H264 user data. Known Bugs/Limitations ====================== 5.40.10.6:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.10.6:L02 Check and repair is only available if the file system is ext4. 5.40.10.6:L03 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.10.6:L04 It's not possible to download recordings bigger than 4GB from the system. 5.40.10.6:L05 Using modifiers like %c in a network share upload event does not work. 5.40.10.6:L06 Moving a view area doesn't always work as expected. 5.40.10.6:L07 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.10.6:L08 Event recipient list incorrectly displayed in IE7. 5.40.10.6:L09 DSCP value for Event/Alarm over IPv4 is always 0. 5.40.10.6:L10 Changing DSCP values might prompt for password. 5.40.10.6:L11 Activating IR illumination buttons can impair live view performance. 5.40.10.6:L12 Zoom bar is disabled until using zoom buttons. 5.40.10.6:L13 Number of different configured video streams are limited by hardware. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Group Exceptions ========== ========== General Image and Video Motion Detection Not done on any overview stream I/O IP filter Active Storage Digital PTZ Temperature Control Light Control Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'motion' Motion 'nsdevice' NetworkShare 'position' PTZ.Preset.P#.Position 'ptzaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'user_ctlqueue' PTZ.UserCtlQueue Supported AXIS VAPIX API Image Resolutions: Resolution Exceptions ========== ========== 1280x800 1280x720 1024x640 800x600 640x480 640x400 640x360 480x360 352x240 320x240 1440x900 1) 1024x768 1) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface