FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M1034-W Network Camera

Release date:      2012-09-11

Release type:      Production

Firmware version:  5.40.5.1

File name:         M1034-W_5_40_5_1.bin

Preceding release: M1034-W_5_40_5.bin

AMC version:       6.0.6.4-1

------------------------------------------------------------------------------
UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Release 5.40.5.1
=================

5.40.5.1 is the second official production release for the AXIS M1034-W

Corrections since 5.40.5
=======================
5.40.5:L35069 Fixes an issue with audio controls which didn't work when having Input Gain other than auto.

5.40.5:L38429 Removed resolution that were not multiple of 16x8 which resulted in a few more/less pixels in width or height.

Features
======================

Known Bugs/Limitations
======================

5.40.3:L27901 Using modifiers like %c in a network share upload event does not
work.

5.40.3:L26145 Moving a view area doesn't always work as expected.

5.40.3:L28738 It's not possible to trigger action rules based on temperature.

5.40.5:L34090 DSCP value for Event/Alarm over IPv4 is always 0

5.40.5:L34091 Changing DSCP values might prompt for password

5.40.5:L34844 Privacy mask can't be added in Chrome

5.40.5:L35612 Video attributes might not be applied after a reboot

5.40.5:L35825 Zoom bar is disabled until using zoom buttons


5.40.5:L35026 Number of different configured video streams are limited by hardware.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification 
version 3 part of the AXIS VAPIX API available at www.axis.com.


Built in templates for dynamic parameters are:

Template               Group
========               =====
'audioclipaction'      Event.E#.Actions
'button'               PTZ.Auxiliary.A1.Button
'event'                Event
'ftp_config'           EventServers.FTP
'ftpaction'            Event.E#.Actions
'guardtour'            GuardTour
'guardtouraction'      Event.E#.Actions
'http_config'          EventServers.HTTP
'httpaction'           Event.E#.Actions
'hwaction'             Event.E#.Actions
'mediaclip'            MediaClip
'motion'               Motion
'nsdevice'             NetworkShare
'position'             PTZ.Preset.P#.Position
'ptzaction'            Event.E#.Actions
'recordaction'         Event.E#.Actions
'smtpaction'           Event.E#.Actions
'streamcache'          StreamCache
'streamprofile'        StreamProfile
'tcp_config'           Eventservers.TCP
'tcpaction'            Event.E#.Actions
'tour'                 GuardTour.G#.Tour
'user_ctlqueue'        PTZ.UserCtlQueue

Supported AXIS VAPIX API Image Resolutions for AXIS M1034-W.

Resolution  Exceptions
==========  ==========
1280x800       
1280x720       
1024x640       
800x600
640x480
640x400
640x360
480x360
352x240
320x240

1440x900     1)
1024x768     1)
768x576      1)
704x576      1)
704x480      1)
384x288      1)
352x288      1)

1) Not visible in web user interface