FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M1033-W/M1034-W Network Camera

Release date:      2014-02-07

Release type:      Production

Firmware version:  5.40.5.5

File name:         M1033-W_5_40_5_5.bin

Preceding release: 5.40.5.4

AMC version:       6.0.6.4-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Improvements since 5.40.5.4
===========================

5.40.5.5:I01 AVHS 2.20 stclient enhancements.

5.40.5.5:I02 Parameter videomaxbitrate is not ignored in VBR anymore.

5.40.5.5:I03 Improved AxisNS stability.

5.40.5.5:I04 ONVIF stability fixes.

5.40.5.5:I05 Button for removing users doesn't disappear anymore.

5.40.5.5:I06 Solved time zone issues for Moscow and Israel.

5.40.5.5:I07 Solved framerate issues when converting events.

5.40.5.5:I08 Improvement in handling large NTP time differences with the
             server.

5.40.5.5:I09 Audio clips in web pages are only played when the play button
             is pressed.

5.40.5.5:I10 The led doesn't flash before fading.

Known Bugs/Limitations
======================

5.40.5.5:L01 Using modifiers like %c in a network share upload event does not work.

5.40.5.5:L02 Moving a view area doesn't always work as expected.

5.40.5.5:L03 It's not possible to trigger action rules based on temperature.

5.40.5.5:L04 DSCP value for Event/Alarm over IPv4 is always 0.

5.40.5.5:L05 Changing DSCP values might prompt for password.

5.40.5.5:L06 Privacy mask can't be added in Chrome.

5.40.5.5:L07 Video attributes might not be applied after a reboot.

5.40.5.5:L08 Zoom bar is disabled until using zoom buttons.

5.40.5.5:L09 Number of different configured video streams are limited by hardware.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification
version 3 part of the AXIS VAPIX API available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions

Group                Exceptions
==========           ==========
General
Image and Video
Motion Detection     Not done on any overview stream
I/O
IP filter
Audio
Active Storage
Digital PTZ
Temperature Control

Built in templates for dynamic parameters are:

Template               Group
========               =====
'audioclipaction'      Event.E#.Actions
'button'               PTZ.Auxiliary.A1.Button
'event'                Event
'ftp_config'           EventServers.FTP
'ftpaction'            Event.E#.Actions
'guardtour'            GuardTour
'guardtouraction'      Event.E#.Actions
'http_config'          EventServers.HTTP
'httpaction'           Event.E#.Actions
'hwaction'             Event.E#.Actions
'mediaclip'            MediaClip
'motion'               Motion
'nsdevice'             NetworkShare
'position'             PTZ.Preset.P#.Position
'ptzaction'            Event.E#.Actions
'recordaction'         Event.E#.Actions
'smtpaction'           Event.E#.Actions
'streamcache'          StreamCache
'streamprofile'        StreamProfile
'tcp_config'           Eventservers.TCP
'tcpaction'            Event.E#.Actions
'tour'                 GuardTour.G#.Tour
'user_ctlqueue'        PTZ.UserCtlQueue

Supported AXIS VAPIX API Image Resolutions for AXIS M1033-W/M1034-W.

Resolution  Exceptions
==========  ==========
1280x800       2)
1280x720       2)
1024x768       2)
1024x640       2)
800x600
640x480
640x400
640x360
480x360
380x270
352x240

1440x900    1) 2)
768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x288     1)

1) Not visible in web user interface
2) Only on M1034-W