AXIS T93E05 Protective Housing
Discontinued product.
Recommended replacement: AXIS T93G05 Protective Housing
Note: Check the recommended replacement product data sheet for full specification
Unobtrusive housing with compact and slim design
- IP66-rated
- Ease of installation
- Compact design
- One cable installation
Compact and flexible design
The compact IP66-rated protective housing finds its best applications in cost-sensitive installations in restricted areas, where video surveillance is meant to be used as deterrent, without obstructing the environment. It is suitable for AXIS M1113 and AXIS M1114 Network Cameras.
AXIS T93E05 Protective Housing is perfect for both indoor and outdoor cost-sensitive installations and wide-ranging applications, such as office buildings, gate surveillance, retail stores and service stations.
Ease of installation
Quick and easy installation thanks to Power over Ethernet connection. The network cable is further protected in the wall mount for tamper protection. A broad list of included accessories make AXIS T93E05 easy to mount in all situations, thanks to one cable installation and wall bracket.
Pure protection for indoors and outdoors
AXIS T93E05 Protective Housing is stripped down from the electronics components, maintaining the protection rating to defend AXIS M1113/M1114 Network Cameras. The materials chosen for the enclosure, in combination with the camera, remove the need for a window heater and the operating temperature ranges between -20 °C to +50 °C (-4 °F to 122 °F).
What you need
| Housing | Network camera | Optional accessories |
| AXIS T93E05 |
AXIS M1113 AXIS M1114 |
- AXIS T91A47 Pole Mounts - VT mounting accessories - AXIS T90B W-LED - AXIS PoE products |
The IP rating system
- IP stands for Ingress Protection
- The rating’s first digit e.g. IP66 relates to the ingress protection
against dust (6 means dust tight, see the table below) - The second digit e.g IP66 relates to the ingress protection against
water (6 means protected against heavy water jets, see the table below)
Protection against solid objects:
| 1st Digit | Description | Definition |
| 0 |
Non-protected
|
No special protection
|
| 1 |
Protected against solid objects greater than 50 mm
|
A large surface of the body such as the hand (no protection against deliberate access). Solid objects exceeding 50mm diameter
|
| 2 |
Protected against solid objects greater than 12 mm
|
Fingers or other objects not exceeding 80 mm in length. Solid objects exceeding 12 mm diameter
|
| 3 |
Protected against solid objects greater than 2.5 mm
|
Tools, wires, etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5 mm diameter
|
| 4 |
Protected against solid objects greater than 1.0 mm
|
Wires or strips of thickness greater than 1.0 mm. Solid objects exceeding 1.0 mm
|
| 5 |
Dust protected
|
Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment
|
| 6 |
Dust-tight
|
No ingress of dust
|
Protection against liquids:
| 2nd Digit | Description | Definition |
| 0 |
Non-protected
|
No special protection
|
| 1 |
Protected against dripping water
|
Dripping water (vertically falling drops)
|
| 2 |
Protected against dripping water when tilted up to 15º
|
Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15º from its normal position
|
| 3 |
Protected against spraying water
|
Water falling as spray at an angle up to 60º from the vertical shall have no harmful effect
|
| 4 |
Protected against splashing water
|
Water splashed against the enclosure from any direction shall have no harmful effect
|
| 5 |
Protected against water jets
|
Water projected from a nozzle against the enclosure from any direction shall have no harmful effect
|
| 6 |
Protected against heavy seas
|
Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities
|
| 7 |
Protected against the effects of immersion
|
Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time
|
| 8 |
Protected against submersion
|
The equipment is suitable for continuous submersion in water under conditions, which shall be specified by the manufacturer
|
