- Reduced installation costs
- IEEE 802.3af compliance
Easier and faster installations
Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling.
No need for power outlets
With the use of Axis PoE products, Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install.
Axis PoE midspans and PoE splitters
Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables to network video products with built-in Power over Ethernet support.
For network video products without built-in PoE support, a PoE splitter must be used to separate power and data coming over the network cable.
Axis PoE midspans and PoE splitters are IEEE 802.3af compliant, which ensures compatibility with all Axis products that have built-in support for Power over Ethernet.
Note: For network cameras such as PTZ (pan/tilt/zoom) and PTZ dome cameras that require higher power than what PoE products can provide, High PoE midspans and splitters are available.
15 W Midspans
AXIS PoE Midspan 16 port
IEEE 802.3af compliant power injector for standard Cat 5 network cables. Supporting up to sixteen AXIS Network Cameras/Video Servers. Metal casing.
AXIS PoE Midspan 8 port
IEEE 802.3af compliant power injector for standard Cat 5 network cables. Supporting up to eight AXIS Network Cameras/Video Servers. Metal casing.
- Product Comparison Table, September 20157.3 MB
- Product Comparison Table, Spring 2015 (US version)2.35 MB
Declaration & statement
- EOL Statement for AXIS PoE Midspan 1 port40 KB
- EOL Statement for pre-standard Hi-POE and POL products50 KB
Article - produced by Axis
- Power surges1.5 MB
- Power over Ethernet117 KB