This document describes how Windows 2000 currently works with
Axis Network Print
Servers and their accompanying tools.
The following print servers (running the latest firmware) have been tested
and found to work properly in Windows
2000:
|
AXIS 5900
AXIS 5800+
AXIS 5500
AXIS 5550
AXIS 5600+
AXIS 5400+
AXIS 5600
AXIS 5400
AXIS 560 |
AXIS 540+
AXIS 640
AXIS 660
AXIS 670e
AXIS 5670e
AXIS 5570e
AXIS 5470e
AXIS 570* |
AXIS 1610
AXIS 1611
AXIS 1620
AXIS 1650
AXIS 140 BJC
AXIS 1440
AXIS Office Basic USB Wireless
AXIS Office Basic USB
AXIS Office Basic Parallel |
The Following Axis tools have been tested and found to work properly in Windows
2000:
AXIS Print Monitor version
3.01 and above
AXIS CAPT Print Monitor version 2.00 and above
AXIS ThinWizard version 2.0 and above
IP Jumpstarter and above
Other information
AXIS NetPilot is a 16-bit application and will therefore not become Windows
2000-certified, since only 32-bit applications can be certified to run under
Windows 2000. However, no problems have been reported with AXIS NetPilot
2.62 running under Windows 2000.
The following products are or will be
discontinued and will therefore not go through
Windows 2000 testing:
|
AXIS 570e
AXIS 570 MIO
AXIS 150/152
AXIS 530/532
AXIS 540/542 |
AXIS 670
AXIS 670 MIO
AXIS PrintPoint 1P 560/100
AXIS PrintPoint 560/100 |
NPS 550
NPS 550 RISC
NPS 630/632
NPS 650 |
|
* This statement is valid for AXIS 570 with serial numbers
starting from 00408C1B1430.
Products with lower serial numbers
are discontinued. |
| |
