AXIS 1650 Fax support 

If the AXIS 1650 is connected to a multifunctional Canon device with fax capabilities, follow these instructions to configure the port settings for faxing:

Notes:

• The following information applies to AXIS 1650 with firmware version 2.10 and above
• Make sure that the printer and print server have been installed according to the AXIS 1650 Set-up Instructions
• In order to send a fax job via AXIS 1650, you must install the fax driver for your MFP: 
  To do this, run the Windows 'Add Printer wizard' and follow the on-screen instructions to install the fax driver. When asked for a Printer Port, select the printer port created in the printer driver installation for Axis 1650. When the installation is complete, you will find a separate Fax object in your "Printers and Faxes" list.

1. Go to Start | Settings | Printers and Faxes.
2. Select the connected Canon Fax device from the list, right click and select Properties.
3. Select the Ports tab and select Configure Port.
4. In the Configure Standard TCP/IP Port Monitor dialog, select the LPR radio button and type fax in the LPR Settings > Queue name field.
5. Click OK.

The port settings are now configured for faxing.