|
LED's
|
LED's in the CD server, Axis StorPoint CD
Power LED is controlled by hardware always lit when power is connected.
Software controlled LED's:
|
Event |
Status LED |
CD LED |
Network LED |
| Power up
sequence |
ON |
ON |
ON |
| |
FLASH |
OFF |
OFF |
| |
OFF |
ON( if CD inserted) |
FLASH |
| First disc
inserted |
|
ON |
|
| Last disc
removed |
|
OFF |
|
| Drive/disk
error* |
|
Flash (0,3 sec ON,
0,3 sec OFF) |
|
| Packet arrived
|
|
|
ON (50 ms) |
Error in
EEPROM,
setting defaults |
Flash (0,3 sec ON,
0,3 sec OFF) |
OFF |
OFF |
| Error in FLASH
PROM, |
Flash (0,3 sec ON,
0,3 sec OFF) |
OFF |
Flash (0,3 sec ON,
0,3 sec OFF) |
| Error in SRAM,
|
Flash (0,3 sec ON,
0,3 sec OFF) |
Flash (0,3 sec ON,
0,3 sec OFF) |
OFF |
| Error in
DRAM/DIMM, |
In software
r<3.07: Flash (0,3 sec ON, 0,3 sec OFF)
In software r>=3.07: Flash (0,45 sec ON, 0,15 sec OFF) |
OFF |
OFF |
| DRAM/DIMM
configuration error |
In software
r<3.07: Flash (0,3 sec ON, 0,3 sec OFF)
In software r>=3.07: Flash (0,45 sec ON, 0,15 sec OFF) |
In software
r<3.07: Flash (0,3 sec ON, 0,3 sec OFF)
In software r>=3.07: Flash (0,45 sec ON, 0,15 sec OFF) |
OFF |
| SW-HW
combination errorr |
Flash (0,3 sec ON,
0,3 sec OFF) |
Flash (counter phase
to network LED) |
Flash (counter phase
to CD LED) |
| Illegal serial
no. |
Flash (0,3 sec ON,
0,3 sec OFF) |
Flash (0,3 sec ON,
0,3 sec OFF) |
Flash (0,3 sec ON,
0,3 sec OFF) |
| Flash load
failed |
Flash (0,3 sec ON,
0,3 sec OFF) |
OFF |
OFF |
| Flash loading |
Flash (0,5 sec ON,
0,5 sec OFF) |
Flash (0,5 sec ON,
0,5 sec OFF) |
Flash (0,5 sec ON,
0,5 sec OFF) |
| CD server is set to
default |
Flash (0,3 sec ON, 0,3 sec OFF) |
OFF |
ON |
| Token-Ring
loopback failure |
Flash (0,3 sec ON,
0,3 sec OFF) |
Flash (0,15 sec ON,
0,15 sec OFF) |
OFF |
| Token Ring
speed error |
ON |
OFF |
Flash (0,3 sec ON,
0,3 sec OFF) |
|
Axis specializes in professional network video and printing solutions