|
Firmware
LED indicators and messages
|
LED indicators and messages
Normal conditions:
The front panel indicators show the status of the StorPoint
CD. The indicators have the following functions:
- Status - Flashes during startup. When the StorPoint CD is
ready for use, the light goes out. The LED remains off, unless
an error condition occurs.
- SCSI - Flashes to indicate activity on the SCSI bus.
- Network - Flashes to indicate the presence of network
traffic.
- Power - Indicates that power is connected to the StorPoint
CD. This LED should always remain lit and is only used to
indicate power is present in the StorPoint unit.
| Event |
Status LED |
SCSI LED |
Network LED |
| Initial power to unit |
Green, solid |
Green, solid |
Green, solid |
| Power-up and self-test (~30 s.) |
Green , short
intervals |
|
|
| Firmware start-up |
Green, long
intervals |
|
|
| Start-up sequence ok |
Green, solid |
|
|
| Idle operation |
Green, solid |
|
|
| Writing to the SCSI bus |
|
Amber, short
intervals |
|
| Reading from the SCSI bus |
|
Green, short
intervals |
|
| 100 Mbit packet arrived |
|
|
Green, short
flash |
| 10 Mbit packet arrived |
|
|
Amber, short
flash |
| Flash loading in progress
|
Amber, Short
flash,
|
|
|
Error Conditions:
|
| Event |
Status LED |
SCSI LED |
Network LED |
| Error message in the log file |
Green/amber, short int. |
|
|
| New f/w req., FTP loading possible |
Amber, long intervals |
|
|
| Error in Flash PROM, return unit |
Red, solid |
|
|
| Illegal serial number, return unit |
Red, short intervals |
|
|
| Error in DRAM, return unit |
Red, long intervals |
|
|
| Error in DRAM expansion module,
replace DIMM module |
Red/amber, short intervals |
|
|
| Fatal SCSI error, return unit |
|
Red, solid |
|
| Dive disconnected or not working |
|
Red, short intervals |
|
| Faulty network connection |
|
|
Red, solid |
|
Axis specializes in professional network video and printing solutions