Resetting the CD server to factory defaults

There are 3 way to set the CD-ROM Server to factory defaults.

1. With FTP:

• Login with FTP. User: root, Password: pass (if not changed)
• Type the command: get defaults
• Restart the CD-ROM Server

2. Changing parameter in the config.ini file.

• Connect to the CD-ROM Server and open the \config\config.ini file
• Set FactoryDefaults = yes
• Restart the CD-ROM Server

3. When you cannot connect to the CD-ROM Server.

• Turn off the power to the CD server
• Open the box
• Using a jumper, short cut the pins 1 and 2 of the 26-pin connector,

   ---------Leds-----------------------------   Front end
   |     Pin 2 |.............| 26       |
   |           1 |.............|           |
   |                                         |
   |                                         |    Circuit board
   |                 85X/95X           |
   |                                         |
   |                                         |
   -----Network,SCSI & Power Connectors------   Rear end

   -----Network,SCSI & Power Connectors------   Rear end
   |                                         |
   |                                         |
   |            Pin 2 |.............|26 |
   |                   1 |.............|   |
   |                                         |
   |                                         |    Circuit board
   |           StorPoint                |
   |                                         |
   |                                         |
   ---------Leds-----------------------------   Front end

• Turn on the power
• The factory default will now be set. This will be indicated by the front panel LED's flashing.
• Turn off the power
• Remove the jumper
• Put the box back together
• Turn on the power

The box will now be set to the parameter setting for factory default.