|
General information |
| The Videotronic HDI-5DE is a High Speed dome with
AutoFocus, AutoIris and presets. The dome uses the 9-databit
BUSTRONIC protocol for communications so you will also need
the KON-485, which is a RS232 to BUSTRONIC converter. View
illustration. For more
details, please contact Videotronic. |
|
Communications info
|
| Method: |
RS232 |
| Baudrate: |
9600 |
| Data
bits: |
7 |
| Parity: |
Odd |
| Stop
bits: |
1 |
|
Supported functions
|
| Type: |
Relative |
| Pan: |
-180 to 180 (360
- continuous) |
| Tilt: |
-90 to 0 (90 total) |
| Zoom: |
Yes |
| Focus: |
Auto-focus |
| Iris: |
Yes |
|
Lens info
|
|
| Zoom: |
18x optical zoom, 4x digital zoom (totaling 72x
zoom), f=4.1~73.8 |
Power requirements |
| Voltage: |
24V AC |
|
Protocol info
|
| Protocol
name: |
BUSTRONIC |
| Number of units
supported by protocol: |
256 |
|
Connection schemes
|
View PTZ connection to camera/video server
View
camera/video server RS485 pinout |
|
Driver Specific settings
|
| Identity: |
This is the address of the pan tilt head connected
to the camera. |
| Movement, Picture
Time: |
This is the
maximum time used with click-in-picture movement. The time
used depends on the distance from the center of the image. The
further away from the center, the longer the time becomes, and
reaches its maximum value at the edge of the picture. |
| Movement, Move Time: |
This value is the time it takes for the dome to move
one degree at the speed given above, used when one of the
8-arrow buttons are clicked and when the cgi commands "rpan"
and "rtilt" are used. |
| Zoom, Time: |
The maximum
time for a zoom move, used when you click the ends of the
relative zoom bar. If you click closer to the center the time
will be scaled to reflect this i.e. the further from the center
you click the longer the time used. This also affects the
"rzoom" cgi-command. |
| Focus, Time: |
The maximum time for a focus move, used when you
click the ends of the relative focus bar. If you click closer
to the center the time will be scaled to reflect this i.e. the
further from the center you click the longer the time used.
This also affects the "rfocus" cgi-command. |
Saving preset positions |
| |
To save preset positions with the Videotronic unit,
a few additional steps are required:
Via the Admin web interface, open the Video Settings
| Preset Positions page.
To set a new preset for Videotronic follow this procedure:
- Enter a name for the preset. Click Create New or
if you want the preset to be used as the home position for
the camera, simply click Create as Home without
entering a name.
- Select the preset created in step 1 in the Goto
preset position box, and then press the Go
button.
- Move the camera to the desired position.
- Click Save.
To change the position for a preset follow this procedure:
- Select the preset you wish to change in the Goto
preset position box, and then press the Go
button.
- Move the camera to the desired position.
- Click Save.
|
Axis specializes in professional network video and printing solutions