|
General information |
| The Videor Technical VPT42Rs is a medium to heavy
duty outdoor pan/tilt head with built-in preset and lens
support. For more details please contact Videor
Technical. |
|
Communications info
|
| Method: |
RS232/RS485 (switchable) |
| Baudrate: |
9600 |
| Data
bits: |
8 |
| Parity: |
None |
| Stop
bits: |
1 |
|
Supported functions
|
| Type: |
Relative |
| Pan: |
-180
to 180 (360 total) |
| Tilt: |
-90 to 90 (180 total) |
| Zoom: |
Yes |
(Please contact
your local dealer/manufacturer for details on a suitable
lens) |
| Focus: |
Yes |
(Please contact your local dealer/manufacturer for
details on a suitable lens) |
| Iris: |
Yes |
(Please contact
your local dealer/manufacturer for details on a suitable
lens) |
Power requirements |
| Voltage: |
24V AC |
| Power
Consumption: |
90W |
|
Protocol info
|
| Protocol
name: |
Proprietary |
| Number of units
supported by protocol: |
2046 |
|
Connection schemes
|
View PTZ connection to camera/video server
View
camera/video server RS485 pinout |
|
Driver Specific settings
|
| Identity: |
This is the address of the pan tilt head connected to
the camera. |
| Movement, Picture
Speed: |
This is the maximum speed used with click-in-picture
movement. The speed used for a click-in-picture movement
depends on the distance from the center of the image; the
further away from the center, the higher the speed becomes,
and reaches its maximum value on the edge of the picture.
|
| Movement, Picture Time: |
This is the time between the start and the stop
commands for a click-in-picture movement. This time is
independent of where in the picture you click. |
| Movement, Move
Speed: |
The
Speed used when one of the 8-arrow buttons are clicked and
when the CGI commands "rpan" and "rtilt" are used. |
| Movement, Move Time: |
This value is the time it takes for the dome to move
one degree at the speed given above. Used when one of the
8-arrow buttons are clicked and when the CGI commands "rpan"
and "rtilt" are used. |
| Zoom, Speed: |
The
maximum speed for a zoom move, used when the ends of the
relative zoom bar are clicked. If the click occurs closer to
the center, the speed will be scaled to reflect this. I.e. the
further from the center the click occurs, the higher the speed
used. This also affects the "rzoom" CGI command. |
| Zoom,
Time: |
The time used for a zoom move. |
| Focus, Speed: |
The
maximum speed for a focus move, used when the ends of the
relative focus bar are clicked. If the click occurs closer to
the center, the speed will be scaled to reflect this. I.e. the
further from the center the click occurs, the higher the speed
used. This also affects the "rfocus" CGI command. |
| Focus, Time: |
The time used for a focus move. |
| Iris, Speed: |
The
maximum speed for a iris move, used when the ends of the
relative iris bar are clicked. If the click occurs closer to
the center, the speed will be scaled to reflect this. I.e. the
further from the center the click occurs, the higher the speed
used. This also affects the "riris" CGI command. |
| Iris,
Time: |
The time used for an iris move.
|
Axis specializes in professional network video and printing solutions