|
General information |
|
The Sensormatic SpeedDome Ultra III is a color camera with integrated pan, tilt,
zoom and a telemetry receiver that uses RS-422 Communication Protocols. For more details, please contact Sensormatic. |
|
Communications info
|
| Method: |
RS422 |
| Baudrate: |
4800 |
| Data bits: |
8 |
| Parity: |
None |
| Stop bits: |
1 |
|
Supported functions
|
| Type: |
Relative |
| Pan: |
-180 to
180 (360 total - continuous) |
| Tilt:
|
-90
to 0 (90 total) |
| Zoom: |
Yes |
| Focus: |
Autofocus |
| Iris: |
Autoiris |
|
Lens info
|
| Zoom: |
12x
optical zoom, +8x digital zoom (totaling 48x zoom), f=4~48, F1.6 |
Power requirements |
| Voltage: |
24-30
VAC, max 0.85A, Power On In-Rush Current: 1.5A |
|
Protocol info
|
| Protocol
name: |
RS-422/RS-485
Communication Protocol for SpeedDome Ultra IV and AD
DeltaDome. |
| Number of units supported by
protocol: |
99 |
|
Connection schemes
|
View PTZ connection to camera/video server
View camera/video server RS485 pinout |
|
Dip switches settings
|
| Set
the rotary address switches recessed at top of housing and
eyeball assembly as
follows: |
| SW3, SW2, SW1: |
The
setting of SW3, SW2, SW1 corresponds to the value of Identity. |
|
|
The last unit on a
RS-422/RS-485 bus
should be terminated.
Select termination with the jumper JW1 (see below). |
JW1: Pin 1-2
connected
JW1: Pin 2-3 connected |
RS-422
unterminated.
RS-422 terminated. |
|
|
|
Driver Specific settings
|
| Identity: |
This
is the address of the connected device. Corresponds to the
device's rotary DIL switch settings. |
Movement,
Picture Speed: |
This
is the maximum speed used with click-in-picture movement,
the speed used for a click-in-picture movement depends of
the distance from the center of the image, the further away
from the center the higher the speed becomes and reaches its
maximum value on the edge of the picture. |
Movement,
Picture Time: |
This is
the time between the start and the stop commands for a
click-in-picture movement, this time is independent of where
in the picture the click occurs. |
Movement,
Move Speed: |
The
Speed used when one of the 8-arrow buttons are clicked and
when the CGI commands "rpan" and "rtilt"
are used. |
Movement,
Move Time: |
This
value is the time it takes for the dome to move one degree
at the speed given above, used when one of the 8-arrow
buttons are clicked and when the cgi commands "rpan"
and "rtilt" are used. |
| Zoom,
Time: |
The
maximum time for a zoom move, used when you click the ends
of the relative zoom bar. If you click closer to the center
the time will be scaled to reflect this i.e. the further
from the center you click the longer the time used, also
affects the "rzoom" cgi-command. |
| Focus, Time: |
The
maximum time for a focus move, used when you click the ends
of the relative focus bar. If you click closer to the center
the time will be scaled to reflect this i.e. the further
from the center you click the longer the time used, also
affects the "rfocus" cgi-command. |
| Iris,
Time: |
The
maximum time for a iris move, used when you click the ends
of the relative iris bar. If you click closer to the center
the time will be scaled to reflect this i.e the further from
the center you click the longer the time used, also affects
the "riris" cgi-command. |
| Auto
Iris: |
Press
this button to reset "Auto Iris" and resume
"Auto Focus" operation. NOTE! This button have the
same function as the Auto Focus button below. |
| Auto Focus: |
Press
this button to reset "Auto Iris" and resume
"Auto Focus" operation. NOTE! This button have the
same function as the Auto Iris button above.
|
Axis specializes in professional network video and printing solutions