Axis Communications - Network Camera Server PTZ

Network Video
PTZ devices
Pelco DD5-C

Pelco DD5-C

General information
The Pelco DD5-C is discontinued by Pelco, but any Pelco dome supporting the "Pelco Digital Coaxitron" protocol, also known as the "D" protocol, should work properly. However this has not been verified by Axis. For more details, please contact Pelco.
Communications info
Method:	RS232 or RS485
Baudrate:	2400
Data bits:	8
Parity:	None
Stop bits:	1
Supported functions
Type:	Relative
Pan:	-180 to 180 (360 total - continuous)
Tilt:	-90 to 0 (90 total)
Zoom:	Yes
Focus:	auto-focus
Iris:	auto-iris
Lens info
Zoom:	12x optical zoom, 2x digital zoom (totaling 24x zoom), f=4~48, min F1.6
Power requirements
Voltage:	24V DC
Protocol info
Protocol name:	"Pelco Digital Coaxitron" also known as the "D" protocol
Number of units supported by protocol:	254
Connection schemes
View PTZ connection to camera/video server View camera/video server RS485 pinout
Driver Specific settings
Identity:	This is the address of the connected device(1-255). This value corresponds to DIP-switch settings in the connected device.
Movement, Picture Speed:	This is the maximum speed used with click-in-picture movement. This speed depends on the distance from the center of the image - the further away from the center the higher the speed becomes, and reaches its maximum value at the edge of the picture.
Movement, Picture Time:	This is the time between the start and the stop commands for a click-in-picture movement. This time is independent of where in the picture you click.
Movement, Move Speed:	The Speed used when one of the 8-arrow buttons are clicked and when the CGI commands "rpan" and "rtilt" are used.
Movement, Move Time:	This value is the time it takes for the dome to move one degree at the speed given above. Used when one of the 8-arrow buttons are clicked and when the CGI commands "rpan" and "rtilt" are used.
Zoom, Time:	The maximum time for a zoom move, used when you click the ends of the relative zoom bar. If you click closer to the center the time will be scaled to reflect this, i.e the further from the center you click, the longer the time used. This also affects the "rzoom" cgi-command.
Focus, Time:	The maximum time for a focus move, used when you click the ends of the relative focus bar. If you click closer to the center, the time will be scaled to reflect this. i.e the further from the center you click, the longer the time used. This also affects the "rfocus" cgi-command.
Iris, Time:	The maximum time for an iris move, used when you click the ends of the relative iris bar. If you click closer to the center, the time will be scaled to reflect this, i.e the further from the center you click, the longer the time used. This also affects the "riris" cgi-command.