|
General information |
| The Molynx Videmech D05RX/L is
discontinued by the manufacturer. The information on this page is for
reference only.
The Molynx Videmech D05RX/L fast dome is a color
camera with integrated pan, tilt and telemetry receiver that
use the Molynx Data protocol. For more details, please contact
Bewator.
|
|
Communications info
|
| Method: |
RS485 (2-wire network) |
| Baudrate: |
9600 |
| Data
bits: |
8 |
| Parity: |
Even |
| Stop
bits: |
1 |
|
Supported functions
|
| Type: |
Relative |
| Pan: |
-180 to 180 (360
total - continuous) |
| Tilt: |
-90 to +5 (95 total) |
| Zoom: |
Yes |
| Focus: |
auto-focus |
| Iris: |
auto-iris with
Set Point Value adjustment |
|
Lens info
|
| Zoom: |
10x optical zoom, f=5.8~58, F=1.8~32 |
Power requirements |
| Voltage: |
24V AC |
| Max current: |
1.3A |
|
Protocol info
|
| Protocol
name: |
Molynx data protocol |
| Number of units
supported by protocol: |
256 |
|
Connection schemes
|
View PTZ connection to camera/video server
View
camera/video server RS485 pinout |
|
Dip switch settings
|
| Set the
rotary dip switches on the main board inside the unit as
follows: |
| SW2, SW1: |
The setting
of SW2, SW1 corresponds to Identity - 1
(in
hexadecimal notation). |
|
Driver Specific settings
|
| Identity: |
This is the address of the connected device (1-256).
This corresponds to the rotary DIL switch settings (0-255) in
the connected device. |
Movement,
Picture
Speed: |
This is the
maximum speed used with click-in-picture movement. The speed
used for a click-in-picture movement depends of the distance
from the center of the image, the further away from the
center; the higher the speed becomes and reaches its maximum
value on the edge of the picture. |
Movement,
Picture Time: |
This is the time between the start and the stop
commands for a click-in-picture movement, this time is
independent of where in the picture the click occurs. |
Movement,
Move
Speed: |
The Speed
used when one of the 8-arrow buttons are clicked and when the
CGI commands "rpan" and "rtilt" are used. |
Movement,
Move Time: |
This value is the time it takes for the dome to move
one degree at the speed given above. Used when one of the
8-arrow buttons are clicked and when the CGI commands "rpan"
and "rtilt" are used. |
| Zoom, Time: |
The maximum
time for a zoom move, used when you click the ends of the
relative zoom bar. If you click closer to the center the time
will be scaled to reflect this i.e the further from the center
you click the longer the time used, also affects the "rzoom"
cgi-command. |
| Focus, Time: |
The maximum time for a focus move, used when you
click the ends of the relative focus bar. If you click closer
to the center the time will be scaled to reflect this i.e the
further from the center you click the longer the time used,
also affects the "rfocus" cgi-command. |
| Focus, Enable: |
Check this
box if you want to be able to adjust the focus manually from a
focus bar. |
| Iris,
Time: |
The maximum time for a iris move, used when you
click the ends of the relative iris bar. If you click closer
to the center the time will be scaled to reflect this i.e the
further from the center you click the longer the time used,
also affects the "riris" cgi-command. |
Axis specializes in professional network video and printing solutions