|
General information |
| For more details please contact Merit
Lilin. |
|
Communications info |
| Method: |
RS485 |
| Baudrate: |
9600 |
| Data
bits: |
8 |
| Parity: |
None |
| Stop
bits: |
1 |
|
Supported functions
|
| Type: |
Relative |
| Pan: |
-180 to 180 (360
total) |
| Tilt: |
0 to 90 (90 total) |
| Zoom: |
Yes |
| Focus: |
auto-focus |
| Iris: |
auto-iris |
|
Lens info
|
|
| Zoom: |
17x optical zoom, f=3.9~66.3, F1.4~2.5 |
Power requirements |
| Voltage: |
24V AC |
| Power
Consumption: |
110W |
|
Protocol info
|
| Protocol
name: |
Proprietary |
| Number of units
supported by protocol: |
2046 |
|
Connection schemes
|
View PTZ connection to camera/video server
View camera/video server RS485 pinout
|
|
Driver Specific settings
|
| Identity: |
This is the address of the pan tilt head connected
to the camera. |
| Movement, Picture
Speed: |
This is the
speed used for a click-in-picture movement, this speed is
independent of where in the picture you click. |
| Movement, Picture Time: |
This is the maximum time between the start and stop
commands used with click-in-picture movement, the time used
for a click-in-picture movement depends of the distance from
the center of the image, the further away from the center the
longer the time becomes and reaches its maximum value on the
edge of the picture. |
| Movement, Move Speed: |
The Speed used
when one of the 8-arrow buttons are clicked and when the cgi
commands "rpan" and "rtilt" are used. |
| Movement, Move Time: |
This value is the time it takes for the dome to move
one degree at the speed given above, used when one of the
8-arrow buttons are clicked and when the cgi commands "rpan"
and "rtilt" are used. |
| Zoom, Time: |
The maximum
time for a zoom move, used when you click the ends of the
relative zoom bar. If you click closer to the center the time
will be scaled to reflect this i.e the further from the center
you click the longer the time used, also affects the "rzoom"
cgi-command. |
| Focus, Time: |
The maximum time for a focus move, used when you
click the ends of the relative focus bar. If you click closer
to the center the time will be scaled to reflect this i.e. the
further from the center you click the longer the time used,
also affects the "rfocus" cgi-command. |
| Iris, Time: |
The maximum
time for a iris move, used when you click the ends of the
relative iris bar. If you click closer to the center the time
will be scaled to reflect this i.e the further from the center
you click the longer the time used, also affects the "riris"
cgi-command. |
| Saving
preset positions: |
To set a new preset for Lilin, follow this procedure: |
|
Via the Admin web interface, open the
Video Settings | Preset Positions page.
- Enter a name for the preset. Click Create New or if you want the preset to be used as the home position for the camera, simply click
Create as Home without entering a name.
- Select the preset created in step 1 in the Goto preset position box, and then press the
Go button.
- Move the camera to the desired position.
- Click Save.
|
|
To change the position for a preset, follow this
procedure: |
|
- Select the preset you wish to change in the Goto preset position box, and then press the
Go button.
- Move the camera to the desired position.
- Click Save.
|
Axis is the world’s leading expert in network video