Axis Communications - Network Camera Server PTZ

Network Video
PTZ devices
Kalatel KTD-312

Kalatel KTD-312

General information
The KTD-312 is a protocol converter/interface, that establishes a communication link between a Digiplex CCTV control system and an external RS233 control device. This feature allows the external device to monitor alarms, download information, and control a wide variety of Digiplex system devices, such as PTZ devices. It is not a dome, it simply converts one protocol into another, hence you also need a Digiplex dome that is compatible with the KTD-312 to get the complete system. For more details, please contact Kalatel.
Communications info
Method:	RS232
Baudrate:	9600
Data bits:	8
Parity:	None
Stop bits:	1
Supported functions
Type:	Relative
Pan:	Yes
Tilt:	Yes
Zoom:	Yes
Focus:	Yes
Iris:	Yes
Power requirements
Voltage:	12V DC
Power Consumption:	3.6VA
Protocol info
Protocol name:	Proprietary
Number of units supported by protocol:	999
Driver Specific settings
Identity:	This is the address of the pan tilt head connected to the camera.
Movement, Picture Speed:	This is the maximum speed used with click-in-picture movement. This speed depends on the distance from the center of the image - the further away from the center the higher the speed becomes, and reaches its maximum value at the edge of the image.
Movement, Picture Time:	This is the time between the start and the stop commands for a click-in-picture movement. This time is independent of where in the picture you click.
Movement, Move Speed:	The Speed used when one of the 8-arrow buttons are clicked and when the CGI commands "rpan" and "rtilt" are used.
Movement, Move Time:	This value is the time it takes for the dome to move one degree at the speed given above. Used when one of the 8-arrow buttons are clicked and when the CGI commands "rpan" and "rtilt" are used.
Zoom, Time:	The maximum time for a zoom move, used when you click the ends of the relative zoom bar. If you click closer to the center the time will be scaled to reflect this i.e the further from the center you click the longer the time used. This also affects the "rzoom" cgi-command.
Focus, Time:	The maximum time for a focus move, used when you click the ends of the relative focus bar. If you click closer to the center, the time will be scaled to reflect this, i.e the further from the center you click, the longer the time used. This also affects the "rfocus" cgi-command.
Iris, Time:	The maximum time for an iris move. Used when you click the ends of the relative iris bar. If you click closer to the center, the time will be scaled to reflect this, i.e the further from the center you click, the longer the time used. This also affects the "riris" cgi-command.