Axis Communications - Network Camera Server PTZ

Network Video
PTZ devices
Ernitec ICU-PTZ-S

Ernitec ICU-PTZ-S

General information
The ICU-PTZ (Integrated Camera Unit) from Ernitec, is a product intended for installation in areas where design, long term stability, smooth operation and low noise are important. It integrates a high resolution color camera, a 10x zoom lens, a telemetry receiver, a twisted pair transmitter and an advanced, highly precise and stable, variable speed pan/tilt, in one easy to install unit. For more details please contact Ernitec.
Communications info
Method:	RS232 or RS485
Baudrate:	2400
Data bits:	8
Parity:	None
Stop bits:	1
Supported functions
Type:	Relative
Zoom:	Yes
Focus:	auto-focus
Iris:	auto-iris
Lens info
Zoom:	10x
Power requirements
Voltage:	24V DC
Protocol info
Protocol name:	Erna
Number of units supported by protocol:	32
Connection schemes
View PTZ connection to camera/video server View camera/video server RS485 pin out
Driver specific settings
Identity:	This is the address of the pan tilt head connected to the camera. Please note that the address 255 is reserved for broadcast, i.e. all the connected heads will receive commands sent to this address.
Movement, Picture Speed:	This is the maximum speed used with click-in-picture movement, the speed used for a click-in-picture movement depends of the distance from the center of the image, the further away from the center the higher the speed becomes and reaches its maximum value on the edge of the picture.
Movement, Picture Time:	This is the time between the start and the stop commands for a click-in-picture movement, this time is independent of where in the picture you click.
Movement, Move Speed:	The Speed used when one of the 8-arrow buttons are clicked and when the cgi commands "rpan" and "rtilt" are used.
Movement, Move Time:	This value is the time it takes for the dome to move one degree at the speed given above, used when one of the 8-arrow buttons are clicked and when the cgi commands "rpan" and "rtilt" are used.
Zoom, Time:	The maximum time for a zoom move, used when you click the ends of the relative zoom bar. If you click closer to the center the time will be scaled to reflect this i.e the further from the center you click the longer the time used, also affects the "rzoom" cgi-command.
Focus, Time:	The maximum time for a focus move, used when you click the ends of the relative focus bar. If you click closer to the center the time will be scaled to reflect this i.e the further from the center you click the longer the time used, also affects the "rfocus" cgi-command.