AXIS 212 PTZ Network Camera
axisFlexSubBanner
Accessories
 |
Vertical tilt adaptor
The vertical tilt adaptor enables mounting the camera on a wall at a downward angle. The vertical tilt adaptor is made of metal, and is vandal resistant. Part no. 5500-791 |
Other accessories
 |
AXIS T8353A Microphone 3.5 mm The microphone has a 3.5 mm adaptor, compatible with Axis M-, P- and Q-line network video products supporting a 3.5 mm jack for microphone input. Part number: 5032-531 |
 |
Mains adaptor PS-H
Axis PS-H is a power supply available in 6 country specific versions. Voltage: 5.1V DC. Max current: 2 A |
 |
AXIS T8310 Video Surveillance Control Board
Modular system with three separate joystick, keypad and jog dial units. |
 |
AXIS Power over Ethernet
Midspans Available in 1, 8 and 16-port versions. A Power over Ethernet Midspan uses the unused pairs in a standard Cat 5 network cable to supply power to Power over Ethernet-enabled products. |
 |
Network cable coupler IP66 Compatible with all Axis network video products. It can be used to connect two Ethernet cable with a male RJ-45 connector. Distance limitation: up to 100m. Part number: 5503-431 |
 |
AXIS MPEG-4 Decoder 10 user license pack MPEG-4 is licensed technology. The network camera includes one viewing client license only. If MPEG-4 multicast is used, the number of viewers is unlimited, but each viewer still needs a separate MPEG-4 decoder license. Installing additional unlicensed copies of the viewing client is prohibited. To purchase additional licenses, contact your Axis reseller. |
 |
AXIS
Camera Station IP-Surveillance software for Axis network video products that provides video monitoring, recording and event management functionalities. |
 |
AXIS
Camera Management Installation and management tool for Axis network video products that automatically finds and sets IP addresses, shows connection status and manages firmware upgrades of multiple devices. |
Spare parts
 |
AXIS 212 Plastic Wall Bracket
Part number: 5500-271 |
axisFlexSubContent